Table of Contents
Advertisement
Figure 126. Removing the system board
Next step
Installing the system
board.
Installing the system board
Prerequisite
Follow the safety guidelines listed in
Steps
1
Unpack the new system board assembly.
CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
CAUTION:
Take care not to damage the system identification button while placing the system board into the chassis.
2
Holding the system board holder, push the system board toward the back of the system till it is seated.
3
Using Phillips #2 screwdriver, tighten the screws to secure the system board to the chassis.
172
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
