Table of Contents
Advertisement
Figure 48. Installing a 2.5-inch drive into a 3.5-inch drive adapter
Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Prerequisites
1
Follow the safety guidelines listed in
2
If installed,
Removing the front bezel
3
Remove the 3.5-inch drive carrier from the system.
Steps
1
Using a Phillips #1 screwdriver, remove the screws from the rails on the drive carrier.
2
Lift the 3.5 inch drive adapter out of the 3.5-inch drive carrier.
94
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
