Table of Contents
Advertisement
Front view of the system
The front view displays the features available on the front of the system.
Figure 2. Front view of 12 x 3.5-inch drive system
Table 1. Features available on the front of the system
Item
Ports, panels, and slots
`1
Left control panel
2
Drive slots
3
Right control panel
4
Information tag
10
Dell EMC PowerEdge R540 overview
Icon
Description
Contains the system health and system ID, status LED, and the
N/A
iDRAC Quick Sync 2 (wireless) indicator.
•
Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For more
information, see the
•
Quick Sync 2 (wireless): Indicates a Quick Sync enabled system.
The Quick Sync feature is optional. This feature allows
management of the system by using mobile devices. This
feature aggregates hardware or firmware inventory and various
system level diagnostic and error information that can be used in
troubleshooting the system. For more information, see the
Integrated Dell Remote Access Controller User's Guide at
Dell.com/poweredgemanuals.
N/A
Enable you to install drives that are supported on your system. For
more information about drives, see the
section.
N/A
Contains the power button, USB ports, iDRAC Direct (Micro-AB
USB), VGA port.
N/A
The Information Tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If
you have opted for the secure default access to iDRAC, the
Information tag also contains the iDRAC secure default password.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
Status LED indicators
section.
Technical specifications
Advertisement
Table of Contents
