Vga Ports; Serial Connector; Internal Dual Sd Module; Video Specifications - Dell EMC PowerEdge R540 Installation And Service Manual

Table of Contents

Advertisement

VGA ports

The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The Dell EMC PowerEdge R540 system supports
two 15-pin VGA ports.

Serial connector

The serial connector connects a serial device to the system. The Dell EMC PowerEdge R540 system supports one serial connector on the
back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.

Internal Dual SD Module

The Dell EMC PowerEdge R540 system supports two optional flash memory card slots with an internal dual MicroSD module.
NOTE:
One card slot is dedicated for redundancy.

Video specifications

The PowerEdge Dell EMC PowerEdge R540 system supports Matrox G200eR2 graphics card with 16 MB capacity.
Table 24. Supported video resolution options
Resolution
640x480
800x600
1024x768
1152x864
1280x1024
1440x900

Environmental specifications

NOTE:
For additional information about environmental certifications, please refer to the Product Environmental Datasheet
located with the Manuals & Documents on
Table 25. Temperature specifications
Temperature
Storage
Continuous operation (for altitude less than 950 m or 3117
ft)
Fresh air
Refresh rate (Hz)
60,70
60,75, 85
60,75, 85
60,75, 85
60,75
60
Dell.com/poweredgemanuals
Specifications
–40°C to 65°C (–40°F to 149°F)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment.
For information about fresh air, see the Expanded Operating Temperature
section.
Color depth (bits)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
Technical specifications
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emc poweredge r540E46s001

Table of Contents