Table of Contents
Advertisement
Figure 63. Installing the heat sink onto the processor
Next steps
1
Installing a processor and heat sink module
2
Installing the air shroud
3
Follow the procedure listed in
Installing a processor and heat sink module
Prerequisites
CAUTION:
Never remove the heat sink from a processor unless you intend to replace the processor. The heat sink is necessary to
maintain proper thermal conditions.
1
Follow the safety guidelines listed in
2
If installed, remove the CPU dust cover.
Steps
1
Align the pin 1 indicator of the heat sink to the system board and then place the processor and heat sink module (PHM) on the
processor socket.
CAUTION:
To avoid damaging the fins on the heat sink, do not press down on the heat sink
fins.
After working inside your
system.
Safety
instructions.
Installing and removing system components
111
Advertisement
Table of Contents
