VxRail P Series appliance
configuration
VxRail V Series appliance
configuration
Ports and connectors specifications
USB ports
The VxRail P Series, V Series, and S Series appliances supports:
•
Two USB 2.0-compliant ports on the front of the appliance
•
One internal USB 3.0-compliant port
•
One micro USB 2.0-compliant port in the front of the appliance for iDRAC Direct
•
Two USB 3.0-compliant ports on the back of the appliance
NIC ports
The VxRail P Series, V Series, and S Series appliances supports up to four Network Interface Controller (NIC) ports that are integrated on
the network daughter card (NDC), and are available in the following configurations:
•
Four RJ-45 ports that support 100 M, 1 G, and 10 Gbps
•
Four SFP+ ports that support up to 10 Gbps
NOTE:
You can install additional PCIe NIC cards. For more information on the PCIe NIC cards, see
installation
guidelines.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the appliance to a VGA display. The VxRail P Series, V Series, and S Series
appliances supports two 15-pin VGA ports on the front and back panels.
Serial connector
The VxRail P Series, V Series, and S Series appliances supports one serial connector on the back panel, which is a 9-pin connector, Data
Terminal Equipment (DTE), 16550-compliant.
Internal Dual SD Module
The VxRail P Series, V Series, and S Series appliances support Internal Dual SD module (IDSDM). The IDSDM is located at the back of the
appliance, in a Dell-proprietary slot. IDSDM card supports two micro SD cards. Micro SD cards capacity for IDSDM are 64 GB.
NOTE:
The IDSDM on the VxRail appliances is pre-configured for appliance bare metal recovery. It is not recommended
to change any of the settings.
Video specifications
The VxRail P Series, V Series, and S Series appliances supports integrated Matrox G200eW3 graphics controller with 16 MB of video
frame buffer.
24 drives appliance
Up to 24 2.5 inch (NVMe, SAS, SATA or Nearline SAS) front accessible
drives in slots 0 to 23.
24 drives appliance
Up to 24 2.5 inch (SAS, SATA or Nearline SAS) front accessible drives in
slots 0 to 23.
NOTE:
VxRail P Series appliance supports NVMe drives in cache
tier, slots 20 to 23 only.
Expansion card
Technical specifications
19