Serial Connector Specifications; Vga Ports Specifications; Idsdm Module; Video Specifications - Dell EMC PowerEdge R7515 Installation And Service Manual

Table of Contents

Advertisement

Serial connector specifications

The serial connector connects a serial device to the system. The PowerEdge R7515 system supports one serial connector on the back
panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.

VGA ports specifications

The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R7515 system supports two
15-pin VGA ports one each on the front and back panels.

IDSDM module

The PowerEdge R7515 system supports optional Internal Dual SD module (IDSDM) module.
The module supports two microSD cards. The supported microSD card storage capacities are mentioned below:
16 GB
32 GB
64 GB
NOTE:
There are two dip switches on the IDSDM for write-protection.
NOTE:
One IDSDM card slot is dedicated for redundancy.
NOTE:
Use Dell EMC branded microSD cards that are associated with the IDSDM configured systems.

Video specifications

The PowerEdge R7515 system system supports Matrox G200eR2 graphics card with 16 MB capacity.
NOTE:
1920 x 1080 and 1920 x 1200 resolutions are only supported in reduced blanking mode.
Table 58. Supported front video resolution options
Resolution
1024 x 768
1280 x 800
1280 x 1024
1360 x 768
1440 x 900
Table 59. Supported rear video resolution options
Resolution
1024 x 768
1280 x 800
1280 x 1024
1360 x 768
1440 x 900
1600 x 900
1600 x 1200
1680 x 1050
Refresh rate (Hz)
60
60
60
60
60
Refresh rate (Hz)
60
60
60
60
60
60
60
60
Color depth (bits)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
Color depth (bits)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
Technical specifications
151

Advertisement

Table of Contents
loading

Table of Contents