Optical Drives; Tape Drives; Ports And Connectors Specifications; Usb Ports Specifications - Dell EMC PowerEdge T340 Installation And Service Manual

Hide thumbs Also See for PowerEdge T340:
Table of Contents

Advertisement

Optical drives

The Dell EMC PowerEdge T340 system supports the following optical drives.
Table 18. Supported optical drive type
Supported drive type
Dedicated SATA DVD-ROM drive or DVD +/-RW drive

Tape drives

The Dell EMC PowerEdge T340 system supports up to two dedicated 5.25-inch tape drives.

Ports and connectors specifications

USB ports specifications

Table 19. Dell EMC PowerEdge T340 system USB port specifications
Front panel
One USB 3.0-compliant port
One iDRAC USB MGMT port (USB
2.0)
NOTE:
The micro USB 2.0
compliant port can only be
used as an iDRAC Direct or a
management port.

NIC ports specifications

The Dell EMC PowerEdge T340 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports that are located
on the back panel.

Serial connector specifications

The Dell EMC PowerEdge T340 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant.

VGA ports specification

The Dell EMC PowerEdge T340 system supports two 15-pin VGA ports, one each, on the front and back of the system.
Supported number of drives
One
Back panel
Two USB 3.0-compliant ports
Four USB 2.0-compliant ports
Internal USB
One internal USB 3.0-compliant port
Technical specifications
121

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents