Table of Contents
Advertisement
Technical specifications
Ports and connectors specifications
USB ports
The VxRail P580N system supports both USB 2.0-compliant ports and USB 3.0-compliant ports:
The following table provides more information about the USB specifications:
The following table shows the USB specifications for the VxRail P580N system.
Table 19 USB specifications
Front panel
l
l
l
NIC ports
The VxRail P580N system supports up to four Network Interface Controller (NIC) ports that are
integrated on the network daughter card (NDC), and are available in the following configurations:
l
l
l
l
l
Serial connector
The serial connector on the rear of system for serial device connection and console redirection.
The VxRail P580N system supports one serial connector on the back panel, which is a 9-pin
connector, Data Terminal Equipment (DTE), 16550-compliant.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display.
The VxRail P580N system supports two 15-pin VGA ports, one each, on the front and back of the
system.
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual
28
Back panel
Two USB 2.0-compliant
l
ports
One micro USB 2.0-
compliant port for
iDRAC Direct
Note:
The micro
USB 2.0 compliant
port can only be
used as an iDRAC
Direct or a
management port.
One optional USB 3.0-
compliant port
Four RJ-45 ports that support 1 Gbps, and 10 Gbps
Four RJ-45 ports, where two ports support maximum of 10 Gbps and the other two ports
maximum of 1 Gbps
Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10 Gbps
Four SFP+ ports that support up to 10 Gbps
Two SFP28 ports that support up to 25 Gbps
Internal USB
Two USB 3.0-
l
compliant ports
One internal USB 3.0-
compliant port
Advertisement
Table of Contents
