Table of Contents
Advertisement
NIC port specifications
The PowerEdge R7525 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on the LAN
on Motherboard (LOM) and integrated on the optional OCP cards.
Table 70. NIC port specification
Feature
LOM card
OCP card (OCP 3.0)
Serial connector specifications
The PowerEdge R7525 system supports one optional card type serial connector, which is a 9-pin connector, Data Terminal Equipment
(DTE), 16550-compliant.
The optional serial connector card is installed similar to an expansion card filler bracket.
VGA ports specifications
The PowerEdge R7525 system supports two DB-15 VGA port one each on the front and back panels.
IDSDM
The PowerEdge R7525 system supports Internal Dual SD module (IDSDM).
The IDSDM supports two SD cards and is available in the following configurations:
Table 71. Supported SD card storage capacity
IDSDM card
•
16 GB
•
32 GB
•
64 GB
NOTE:
One IDSDM card slot is dedicated for redundancy.
NOTE:
Use Dell EMC branded SD cards that are associated with the IDSDM configured systems.
Video specifications
The PowerEdge R7525 system supports integrated Matrox G200 graphics controller with 16 MB of video frame buffer.
Table 72. Supported front video resolution options
Resolution
1024 x 768
1280 x 800
1280 x 1024
1360 x 768
1440 x 900
Specifications
1 GB x 2
1 GbE x 4, 10 GbE x 2, 25 GbE x 2, 25 GbE x 4, 50 GbE x 2, 100
GbE x 2
Refresh rate (Hz)
60
60
60
60
60
Color depth (bits)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
Technical specifications
191
Advertisement
Table of Contents
