Location Alert Operation - Uniden BCD996XT User Manual

Display Formats of Each Information:
The advance direction:
The time:
The speed:
The elevation:
The direction for the POI:
The distance for the POI:
The ETA to the POI:
The latitude:
The longitude:
Error Display
When the scanner does not receive GPS data, the scanner displays "No GPS Input".
When the scanner is searching for the satellite, the scanner displays "Searching for Satellite".
HOME
You can select a POI by turning [Scroll Control] knob even if the scanner displays an error message.

Location Alert Operation

This alerts you when you approach a destination, a Dangerous Xing or a Dangerous Road by ringing an
alert.
Location Alert System Types have "POI (Point Of Interest)", "Xing (Dangerous Xing)" and "Road
(Dangerous Road) ".
Thursday, May 14, 2009
This is one of N, NE, E, SE, S, SW, W and NW.
The time is displayed as "hh:mm" (hh: hour, mm: minute). If "12H" is
selected at Set Time Format, "A" or "P" is displayed at a right end.
This is a triple digits. According to the setting of Set Unit, "mph"
(mile/hour) or "kph" (km/hour) is displayed for a unit.
This is displayed as "EEEE ft" (EEEE: elevation of a positive number) or "-
EEE ft" (EEE: elevation of a negative number) using four digits. According
to the setting of Set Unit, "ft" (feet) or "km" is displayed for a unit.
One of eight directions is shown. There are "", "", "", "", "", "",
"" and "". In Function Mode, this arrow changes to small one.
This is displayed as "DDDD.dd mi" (DDDD.dd: distance). According to the
setting of Set Unit, "mi" (mile) or "km" is displayed for a unit.
This is displayed as "hhh mmm" (hh: hour, mm: minute).
This is displayed as "N" or "S" and "DDºMM'SS.ss" (for DMS format) or
"DD.dddddd" (for DEG format).
This is displayed as "W" or "E" and "DDDºMM'SS.ss" (for DMS format) or
"DDD.dddddd" (for DEG format).
No GPS I nput
↑
SCAN
Searchi ng
for Satelli te
HOME
SCAN
181
↑