Set Audio Type - Uniden BCD996XT User Manual

EditChannel < UnidenMan4 < TWiki
Edit Frequency (conventional systems)
Enter a valid frequency for this band. If the frequency is invalid or if it already exists, the
scanner sounds an error tone and prompts you enter the frequency again.
Edit Talk Group ID
Options available for all channels:
You have the following options for channels (click on any setting for an explanation):
Edit Name
Enter a name or edit the existing one. Names can be 16 characters long, and they can
contain upper and lower case letters, punctuation, and spaces. Turn the SELECT-
VOLUME-SQUELCH knob on the handheld scanners or the SCROLL / FUNCTION
knob on mobile scanners to choose the character you want, then press 6 (right cursor) to
move the cursor to the next character.

Set Audio Type

Select the type of audio signal contained on this channel. Choose Digital Only or Analog
Only according to the signal type; select All if this channel might contain both digital and
analog signals.
Set Number Tag
Assign a number to this system or channel that you can use to tune directly to a specific
channel. Choose a number from 0 to 999. (For more information, see
Set Modulation
Select what type of modulation the scanner should use for this frequency or channel.
(Only the modulation types available for this frequency or channel are displayed.)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/EditChannel.html (2 of 5)5/26/2009 11:14:45 AM
(trunked systems)
Number Tags.)