Uniden BCD996XT User Manual page 941

ProgramLocation < UnidenMan4 < TWiki
for 100 ms / 1397 Hz for 250 ms
Alert 3 :
2093 Hz for 125 ms / Silence for 50 ms / 1976 Hz for 125 ms / Silence for
50 ms / 2093 Hz for 125 ms
Alert 4 :
1319 Hz for 25 ms / Silence for 50 ms / 1397 Hz for 25 ms / Silence for 50
ms / 1175 Hz for 25 ms / Silence for 50 ms / 1319 Hz for 25 ms
Off (No alert tone sounded).
If you select an alert tone, the scanner prompts you to select the volume level ( Level 1
through Level 15 ) you want to the alert tone to use; leave the volume at Auto to have the
scanner sound the alert tone without changing the volume.
Set Location Info
Enter the latitude and longitude for this location.
Set Range
Enter how far out from this location you want the scanner to alert you. You can
configure the scanner to sound an alert tone and flash a light when you reach the radius
entered here. The scanner treats the number you enter here as miles or kilometers
depending on the value you selected in the Set Unit field in the Set GPS Format menu
(under the main
km steps.
Set Lockout
Decide whether you want to lock out this location so the scanner no longer checks it.
Choose Unlocked (default), Temporary L/O (the location is locked out until you turn the
scanner off and back on), or Lockout (the location is locked out until you change this
setting).
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ents/temp/CDImage_090515/Manual/ProgramLocation.html (3 of 6)5/26/2009 11:15:53 AM
Settings menu). Enter a range from 0.05 through 4.0 mi/km, in 0.05 mi/