Uniden BCD996XT User Manual page 727

Examples of each Display Mode are as follows.
SW 01: 23P
39 mph 544 ft
OFF
SCAN
GPS DATA Display
SW 166 m
24. 19 km
HOME
SCAN
Elevation Display
GPS DATA Display
This Display Mode displays the direction of travel, the time, the speed and the elevation.

The left side of the 1st line displays the current direction of travel.

The right side of the 1st line displays the present time.

The left side of the 2nd line displays the current speed.

The right side of the 2nd line displays the elevation of the current location.

The 3rd line always displays "OFF" because a POI is not selected.
ETA / Clock / Elevation / Speed Display
These Display Modes display the direction and the distance for the selected POI, the direction of travel and
individual information.

The large arrow shows the direction to the selected POI.

The left side of the 1st line displays the current direction of travel.

The 2nd line displays the distance to the selected POI.

The right side of the 1st line displays individual information.
- ETA Display Mode shows the ETA (Estimated Time for Arrival) to the selected POI.
- Clock Display Mode shows the present time.
- Elevation Display Mode shows the elevation of the current location.
- Speed Display Mode shows the current speed.
The name of the selected POI is displayed on 3rd line.
Location Display
This Display Mode displays the latitude and longitude of the current location.

The 1st line displays the latitude of the current location.

The 2nd line displays the longitude of the current location.

The 3rd line displays "OFF" (when a POI is not selected) or the name of the selected POI.
Thursday, May 14, 2009
SW 1h 10m
HOME
↑
SCAN
SW 62 kph
HOME
↑
SCAN
15. 03 mi
↑
ETA Display
24. 19 km
↑
Speed Display
169
SW 13: 23
15. 03 mi
HOME
↑
SCAN
Clock Display
N 32 " 57' 33. 60
W 97 " 05' 34. 18
HOME
↑
SCAN
Location Display