Uniden BCD996XT User Manual page 485

<COMMAND QSL>
Get/Set System/Site Quick Lockout
Controller → Radio
QSL[\r]
QSL,[PAGE0],[PAGE1],[PAGE2],[PAGE3],[PAGE4],[PAGE5],[PAGE6],[PAGE7],[PAGE8],
[PAGE9][\r]
Radio → Controller
QSL,[PAGE0],[PAGE1],[PAGE2],[PAGE3],[PAGE4],[PAGE5],[PAGE6],[PAGE7],[PAGE8],
[PAGE9][\r]
QSL,OK[\r]
[PAGE0] – [PAGE9] : ########## (each # is 0 - 2)
[PAGE0]
[PAGE1]
[PAGE2]
[PAGE3]
[PAGE4]
[PAGE5]
[PAGE6]
[PAGE7]
[PAGE8]
[PAGE9]
This command is only acceptable in Programming Mode.
It cannot turn on/off the Quick Key that has no System / Site.
<COMMAND QGL>
Get/Set Group Quick Lockout
Controller → Radio
QGL,[SYS_INDEX][\r]
QGL,[SYS_INDEX],##########[\r]
Radio → Controller
QGL,##########[\r]
QGL,OK[\r]
########## (each # is 0 - 2)
The Order of Quick Key is as same as LCD Icon (1 – 9, 0).
This command is only acceptable in Programming Mode.
It cannot turn on/off the Quick Key that has no Group.
0 : Not assigned (Displayed as "-" on the scanner.)
1 : On (Displayed as each number on the scanner.)
2 : Off (Displayed as "*" on the scanner.)
The Order of Quick Key is as same as LCD Icon.
: Quick Key 1 -
: Quick Key11 - 19,10
: Quick Key21 - 29,20
: Quick Key31 - 39,30
: Quick Key41 - 49,40
: Quick Key51 - 59,50
: Quick Key61 - 69,60
: Quick Key71 - 79,70
: Quick Key81 - 89,80
: Quick Key91 - 99,90
: Group Quick Key status of [SYS_INDEX].
0 : Not assigned (Displayed as "-" on the scanner.)
1 : On (Displayed as each number on the scanner.)
2 : Off (Displayed as "*" on the scanner.)
9, 0
236