Uniden BCD996XT User Manual page 638

Hide thumbs Also See for BCD996XT:
Table of Contents

Advertisement

For Trunked System
If a trunked System is selected, you will be asked to select a site. If no site is stored in that system,
message "No Site Stored Press Any Key" will be displayed and the scanner will sound an error tone. After
the site is selected, the scanner begins searching that System. Any time a TalkGroup goes active, the
scanner checks to see if that TalkGroup has been previously stored in that System. If so, it resumes
searching. Otherwise, it stores the TGID into the Group named "Found Channels" (the scanner
automatically creates this Group if it does not exist). Then it resumes searching.
If the selected site is locked out, it is unlocked and the scanner starts ID Auto Store on the site.
Note: Search and Store does not work in the following conditions. The scanner sounds an Error Tone, and
it displays System Name on first Line and Error Message on second line. Then it goes to End State. (See:
End Conditions )
Error Condition
A System / a Site that has no frequency is selected.
The Quick Key for the System / Site to which that System /
Site belongs is turned off.
The Group that stores found Channels already has the
number of Max Auto Store or more Channels stored.
Note: The following selections are invalid. The scanner displays Error Message and "Press Any Key". Press
any key to return to System selection.
Error Condition
EDACS SCAT System is selected.
A system that does not store a site that can be selected.
During Search and Store operation for a trunked System, "ID SEARCH AND STORE" scrolls on the second
line. System / Site Name is displayed on the first Line.
If the scanner finds a TGID, it performs a duplication check in the System (the scanner does not show this
state). And while storing the TGID into Memory, it displays "Storing" on the second line.
End Conditions
The scanner will stop storing if the number of found frequencies or TGID exceeds Max Auto Store. Then it
displays "Limit Reached" and sounds a Confirmation Tone.
When the number of Channels in trunked System exceeds 500, the scanner stops the storing operation.
Then it displays "TGID Full".
When it exceeds the limit of Group/Channel creation during a storing operation, the scanner stops the
storing operation. Then it displays "Over Limit" and sounds an Error Tone.
Thursday, May 14, 2009
Si te 3- 1
I D SEARCH AND ST
NFM
S0: - - - 4 - - - - - -
GRP- - - - - - - - - -
80
Error Message
"No Control Chan"
"Nothing to Scan"
"Over Limit"
Error Message
"Invalid System"
"No Site Stored"
MOT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bct15xBc346xtBcd396xt

Table of Contents