NumberTags < UnidenMan4 < TWiki
3. Enter the number tag you want to use for the Close Call Hits system.
To a service search range :
1. Open the
2. Select
number tag to.
3. Select
4. Enter the number tag you want to use for this search range.
To a custom search range :
1. Open the
2. Select
number tag to.
3. Select
4. Enter the number tag you want to use for this custom search range.
Assigning a CHNT
You can assign CHNTs to channels even if the system does not have an assigned
SNT. However, without an SNT, you can only navigate to these channels from
within that system itself.
CHNTs can be duplicated within their own system, but you will see a warning
when you create multiples.
CHNTs can range from 0 to 999 .
1. Open the
2. Select the system containing the channel you want to assign the number tag to.
3. Select
4. Select
5. Select
6. Enter the number tag you want to use for this channel.
Using Number Tags
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/NumberTags.html (2 of 3)5/26/2009 11:12:33 AM
Search for...
menu.
Edit
Service, then select the service search range you want to assign the
Search with
Scan, then select
Search for...
menu.
Edit
Custom, then select the custom search range you want to assign the
Search with
Scan, then select
Program System
menu.
Edit
Group, then select the channel group you want.
Edit
Channel, then select the channel you want to assign the number tag to.
Set Number
Tag.
Set Number
Tag.
Set Number
Tag.