Uniden BCD996XT User Manual page 972

AnalogEditChannel < UnidenMan4 < TWiki
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
This menu lets you create channels and edit existing channels. All existing channels are
listed in the order they were created: select the channel you want to edit, or select New
Channel to create a new one. You can have up to up to 1000 channels in a conventional
system and 500 channels in a trunked system.
When you create a new channel, the scanner prompts you to enter the frequency (in a
conventional system) or the Talk Group ID (in a trunked system) for the channel: you
can edit these at any time through this menu.
Edit Frequency (conventional systems)
Edit Talk Group ID (trunked systems)
Global channel options
Conventional system channel options
Edit Frequency (conventional systems)
Enter a valid frequency for this band. If the frequency is invalid or if it already exists, the
scanner sounds an error tone and prompts you enter the frequency again.
Edit Talk Group ID (trunked systems)
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/CDImage_090515/Manual/AnalogEditChannel.html (1 of 5)5/26/2009 11:16:07 AM
Edit Name
Set Number Tag
Set Priority
Set Alert
Set Record (BCT15X Only)
Set Lockout
Volume Offset
Copy Channel
Delete Channel
New Channel
Set CTCSS/DCS
Set Modulation
Set Attenuator