Uniden BCD996XT User Manual page 30

LTRTrunkedSystems < UnidenMan4 < TWiki
Programming an LTR System
To program an LTR system, you'll need to program the required elements in following order
for information on using the
Create a system
1. Go to the
2. The scanner will prompt you for the System Type. Select LT .
3. When the scanner prompts you confirm, tap YES .
4. The scanner creates the system with a default name. Select
5. If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's
menu and option name on each scanner are listed beside the property.
Property
None
Name
Number tag
Automatic Gain Control
(AGC)
Record Out
file:///C|/Documents%20and%20Settings/POpitz/My%20D...s/temp/CDImage_090515/Manual/LTRTrunkedSystems.html (2 of 7)5/26/2009 11:11:52 AM
Channel properties
menu):
Program System menu and choose New System .
Required
Recommended
Edit Name
Set Number Tag
Optional
BCD396XT and BCD996XT:
AGC
BC346XT and BCT15X: Not available
BCD996XT and BCT15X:
BCD396XT and BC346XT: Not available
Edit Name
Program System menu. If necessary, the sub-
Option name
Set Audio
Set Record
(click here
if you want to change it.