Weather Alert 2 - Uniden BC 248CLT Reference Manual

10 band, 50 channel scanner
Hide thumbs Also See for BC 248CLT:
Table of Contents

Advertisement

BC248clt.qxd
1/19/00
10. W X / A L E RT K e y Selects Weather Mode. Also Selects Weather Alert ON/OFF.
11. ALARM K e y
Turns the Tone Alarm. Turns the Radio Alarm ON/OFF by pressing
the key more than 2 seconds.
12. ALARM SET K e y Press more than 2 seconds to enter the Alarm Time Set mode.
13. TIME SET K e y Press more than 2 seconds to enter the Present Time Set mode.
14. T I M E K e y
Press to review the clock time and cancel the Alarm time set and Present
Time Set mode.
15. L O C K O U T K e y Prevents scanning of the displayed channel. The L/O indicator appears
when the current channel is locked out.
Press LOCKOUT again to unlock the channel. Lockout is active only when
the scanner stops on an active channel or a channel selected in Manual
M o d e .
16. A M / P M K e y
Select a.m. or p.m. when setting the clock time or alarm time.
17. D E L AY K e y
Turns Delay function. When Scan stops on a channel it causes scanner to
remain on that channel for 2 seconds before the scanning resumes to wait
for a possible reply.
1 8 . P R I O R I T Y K e y Turns Priority mode ON/OFF. In Priority mode the scanner samples the
designated Priority Channel every 2 seconds while in Scan or Manual mode.
If a transmission on the designated Priority Channel is detected, the scanner
monitors that channel until no signal is present.
19. t/sK e y
Steps up or down through the minutes in the clock mode, channel in the
Manual mode, or frequency in the Frequency Step Radio mode.
20. S C A N K e y
Press to start scanning.
21. M A N U A L K e y Press to stop scanning. Press MANUAL again to step to the next channel.
Also use for direct channel access by first entering the channel number and
then pressing MANUAL to go directly to that channel.
11:22 AM
Page 5
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents