Uniden BCD996XT User Manual page 980

BCT15XHoldMode < UnidenMan4 < TWiki
Hold mode
This page applies only to the BCT15X. For other models see:
BCD396XT and BC346XT Hold Mode
BCD996XT Hold Mode
Hold mode lets you edit the current frequency, system, site, or channel. You can access these functions by using the different key operations:
Key Operation in Hold Mode
Reading the displays in Hold mode
Conventional system display
Trunked system display
Hold on a trunked system control channel
Service search with scan hold display
Key Operation in Hold Mode
Key Name
(2nd operation)
Action On
Tap Toggle DOT and Police
State-by-State search
FUNCTION + Toggle priority mode.
Tap
Key Name
(2nd operation)
BearTracker / Highway
Action on:
Tap Toggle the BearTracker
Warning System and
Highway Patrol State-by-
FUNCTION + Start scanning in Alert
Tap
FUNCTION +
Press & Hold
Key Name
(2nd operation)
Action on:
Tap
file:///C|/Documents%20and%20Settings/POpitz/My%20...nts/temp/CDImage_090515/Manual/BCT15XHoldMode.html (1 of 6)5/26/2009 11:16:17 AM
DOT / Police/
PRIORITY
mode.
Patrol / Alert
State search mode.
Toggle the IF for that the current
Plus mode.
NA
GPS / Weather
Switch to the GPS
Navigation display.
1 (Search 1)
Enter the digit in Direct Entry.
Start the search range assigned to this Search Key.
4 (IF exchange)
Enter the digit in Direct Entry.
Change the volume offset for
frequency.
NA
7 (Attenuation)
Enter the digit in Direct Entry.
2 (Search 2)
5 (Level offset)
Change the display mode.
the current channel.
NA
8 (Reverse freq.)
3 (Search 3)
6 (Display mode)
NA
9 (Modulation)