Uniden BCD996XT User Manual page 196

BCD996XTGPSMode < UnidenMan4 < TWiki
GPS Mode
This page applies only to the BCD996XT. For other models see:
BCD396XT and BC346XT GPS Mode
BCT15X GPS Mode
You must have a compatible GPS receiver
GPS Mode
See Also
Reading the display in GPS mode
GPS Data display
ETA / Clock / Elevation / Speed Display
Location Display
Location Alert display
Location review display
Keypad controls in GPS Review Location Mode
Keypad controls in GPS Mode
See Also
GPS mode is only one small part of location-based scanning. For more information on using your scanner with a GPS receiver, see the
following links:
Location-based Scanning
an overview of why you might want to use a GPS receiver with your scanner
an explanation of two different approaches to location-based scanning
some information on finding antenna locations
Programming locations
details on how to program locations for systems, sites, and channels
details on how to program Points of Interest ( POI ), Dangerous Roads, and Dangerous Intersections ( Dangerous Xing )
information on reviewing and editing locations
Connecting a GPS receiver
details on which GPS receivers are compatible
instructions on connecting a GPS receiver
troubleshooting tips if you can't the receiver working with the scanner
Reading the display in GPS mode
There are several displays available in GPS mode.
GPS Data display
file:///C|/Documents%20and%20Settings/POpitz/My%20...ts/temp/CDImage_090515/Manual/BCD996XTGPSMode.html (1 of 5)5/26/2009 11:12:47 AM
connected!
contains
contains
contains