Uniden BCD996XT User Manual page 268

Function + 6 / RIGHT / disp Key

Press to change the Display Mode. (Scan Hold Mode and Custom Search Mode)
(Display mode 1 -> Display mode 2 -> Display mode 3 -> Display mode 1 ->....)

Press to change the GPS Display. (GPS Mode)
Function + 7 / att (Attenuator) Key

Press to toggle the attenuation state. (except GPS Mode)

Long press to toggle global attenuator. (except GPS Mode)
Function + 8 / rev (Reverse) Key

Press to monitor the current frequency's reverse frequency. It returns to current frequency when
the key is released. (Scan Hold Mode, Search Mode, Search Hold Mode, Close Call Only Mode and
Close Call Hold Mode)
Function + 9 / mod (Modulation) Key

Press to change the modulation state. (except GPS Mode and WX Scan Mode)
Function + 0 / wx (Weather) Key

Press to toggle WX Scan Mode and WX Alert Scan Mode while WX Scan or WX Alert Scan.

Press to toggle WX Alert Priority. (except WX Scan Mode)

Long press to start WX Scan. (except WX Scan Mode)
. (Decimal) / no / pri (Priority) Key

Press to cancel these displays while displaying Error or Warning message.

Press to input "."(decimal) for frequency.

Press to input "-" or "i" for TGID.

Press to input a space in editing a data name.

Press twice to clear the data in editing data name.

Press to input "-" or "i" for Direct Enter in Hold Mode, Close Call Only Mode, Tone-Out Mode.

Press in Scan Mode to start the selection for the ten's place of a System/Site/Search Quick Key.
Then, press number key to jump to each number's place of a Quick Key.
Function + . / no / pri Key

Press to toggle Priority Mode in Scan Mode. (On / Plus On / Off)
E (Enter) / yes / gps Key

Press to accept the input data or a Menu Item.

Press to edit the channel data. (Scan Mode and Scan Hold Mode)

Press to quickly save the frequency in Search Mode, Search Hold Mode, Close Call Mode, Close Call
Hold Mode, WX Scan Mode and WX Scan Hold Mode.

Press to go to the editing menu for current Tone-Out.

Press to go to Review Location Mode. (GPS Mode)
Function + E / yes / gps Key

Press to change GPS Mode.

Long press to store a current location data.
Thursday, May 14, 2009
19