Uniden BCD996XT User Manual page 800

<COMMAND SHK>
Get/Set Search Key Settings
Controller → Radio
SHK[\r]
SHK,[SRCH_KEY_1],[SRCH_KEY_2],[SRCH_KEY_3],[RSV],[RSV],[RSV][\r]
Radio → Controller
SHK,[SRCH_KEY_1],[SRCH_KEY_2],[SRCH_KEY_3],[RSV],[RSV],[RSV][\r],SHK,OK[\r]
[SRCH_KEY_1] - [SRCH_KEY_3]
.(dot)
PublicSafety: Public Safety range
News
HAM
Marine
Railroad
Air
CB
FRS/GMRS/MURS: FRS/GMRS/MURS range
Racing
FM
Special
Get/Set Search Key Settings.
This command is only acceptable in Programming Mode.
<COMMAND GLF>
Get Global Lockout Freq
Controller → Radio
GLF[\r]
Radio → Controller
GLF,[FRQ][\r]
GLF,-1[\r]
[FRQ]
This command is used to get Global L/O frequency list.
You should call this command again and again to get all-global L/O frequency
until the scanner returns "-1".
"-1" means that no more L/O frequency exists.
This command is only acceptable in Programming Mode.
: Not assign
: News range
: HAM Radio range
: Marine range
: Railroad range
: Air range
: CB Radio range
: Racing range
: FM Broadcast range
: Special range
: Lockout Frequency
: Search Range
CUSTOM_1: Custom 1 range
CUSTOM_2: Custom 2 range
CUSTOM_3: Custom 3 range
CUSTOM_4: Custom 4 range
CUSTOM_5: Custom 5 range
CUSTOM_6: Custom 6 range
CUSTOM_7: Custom 7 range
CUSTOM_8: Custom 8 range
CUSTOM_9: Custom 9 range
CUSTOM_10: Custom 10 range
TONE_OUT: Tone Out mode
(250000-13000000)
242