0Band Scope Mode; Scope Mode - Uniden BCD996XT User Manual

0BAND SCOPE MODE

Band Scope Mode searches a frequency range and displays the signal level in real time.
You can set the center frequency and span of the frequency range.
In Hold Mode, you can monitor the displayed frequency.
*Close Call, Priority Scan, Weather Scan and GPS functions do not work in Band Scope Mode.

Scope Mode

SRCH
START
850. 00
Search Mode with Normal Screen
MAX
CF
SPN 2M
Search Mode with Setting Screen
SRCH
:
MAX
:
HOLD
:
MF 850. 8125 :
:
:
:
START 850. 00 :
END 852. 00 :
CF 851. 0000 :
SPN 2M :
STP 12. 5K :
NFM
:
ATT
:
I FX
:
Thursday, May 14, 2009
MF 850. 8125
END
852. 00
MF 850. 8125
851. 0000
STP 12. 5K
This icon appears while in Search Mode.
This icon appears while in MAX Hold Search Mode.
This shows in the same place as " SRCH ".
This icon appears while in Hold Mode.
This shows in the same place as " SRCH ".
This icon and number show the marker frequency.
This icon shows the signal level.
This icon shows the marker point.
This icon shows the center frequency point.
This icon and number shows the start frequency of the search range.
This icon and number shows the end frequency of the search range.
This icon and number shows the center frequency.
This icon and parameter shows the frequency span.
This icon and parameter shows the search step.
This icon shows the modulation type.
This icon appears when the attenuator state for a range is On.
This icon appears on the frequency has IF exchange On.
HOLD
START
850. 00
Hold Mode with Normal Screen
F HOLD
NFM ATT
Hold Mode in Function Mode
178
MF 850. 8125
END
852. 00
MF 850. 8125
I FX