Uniden BCD996XT User Manual page 807

<COMMAND TON>
Get/Set Tone-Out Settings
Controller → Radio
TON,[INDEX][\r]
TON,[INDEX],[NAME],[FRQ],[MOD],[ATT],[DLY],[ALT],[ALTL],[TONE_A],[RSV],
[TONE_B],[RSV],[RSV],[RSV] ,[RSV],[ALT_PATTERN],[RSV],[RSV],
[RSV] [\r]
Radio → Controller
TON,[INDEX],[NAME],[FRQ],[MOD],[ATT],[DLY],[ALT],[ALTL],[TONE_A],[RSV],
[TONE_B],[RSV],[RSV],[RSV] ,[RSV],[ALT_PATTERN],[RSV],[RSV],
[RSV] [\r]
TON,OK[\r]
[INDEX]
[NAME]
[FRQ]
[MOD]
[ATT]
[DLY]
[ALT]
[ALTL]
[TONE_A]
[RSV]
[TONE_B]
[ALT_PATTERN]: Alert Light Pattern(0:ON / 1:SLow / 2:Fast)
Get/Set Tone-Out Settings.
This command is only acceptable in Programming Mode.
<COMMAND CNT>
Get/Set LCD Contrast Settings
Controller → Radio
CNT[\r]
CNT,[CONTRAST][\r]
Radio → Controller
CNT,[CONTRAST][\r]
CNT,OK[\r]
[CONTRAST]
Get/Set LCD Contrast Settings.
This command is only acceptable in Programming Mode.
: Index
: Name
: Channel Frequency
: Modulation
: Attenuation
: Delay Time
: Alert Tone
: Alert Tone Level
: Tone A Frequency
ex.) 10000 means 1000.0Hz
00000 means
: Reserve Parameter
: Tone B Frequency
: LCD Contrast
(1-9,0 means 10)
(max.16char)
(AUTO / FM / NFM)
(0:OFF / 1:ON)
(0,1,2,5,10,30 / INF : Infinite)
(0:OFF/1-9:Tone No.)
(0:AUTO/1-15)
0.0Hz
* This is always only ",".
(1 - 15)
249