Uniden BCD996XT User Manual page 489

<COMMAND AST>
Append Site
Controller → Radio
AST,[SYS_INDEX],[RSV][\r]
Radio → Controller
AST,[SITE_INDEX][\r]
[SYS_INDEX]
[SITE_INDEX]
Append Site to the system.
Returns "-1" if the scanner failed to create because of no resource.
This command is only acceptable in Programming Mode.
<COMMAND SIF>
Get/Set Site Info
Controller → Radio
SIF,[INDEX][\r]
SIF,[INDEX],[NAME],[QUICK_KEY],[HLD],[LOUT],[MOD],[ATT],[RSV],[RSV],[RSV],
[START_KEY],[LATITUDE],[LONGITUDE],[RANGE],[GPS_ENABLE],[RSV],[MOT_TYPE],
[EDACS_TYPE],[P25WAITING],[RSV][\r]
Radio → Controller
SIF,[RSV],[NAME],[QUICK_KEY],[HLD],[LOUT],[MOD],[ATT],[C-CH],[RSV],[RSV],
[REV_INDEX],[FWD_INDEX],[SYS_INDEX],[CHN_HEAD],[CHN_TAIL],[SEQ_NO],
[START_KEY],[LATITUDE],[LONGITUDE],[RANGE],[GPS_ENABLE],[RSV],[MOT_TYPE],
[EDACS_TYPE],[P25WAITING],[RSV][\r]
SIF,OK[\r]
[INDEX]
[NAME]
[QUICK_KEY]
[HLD]
[LOUT]
[MOD]
[ATT]
[C-CH]
[REV_INDEX]
[FWD_INDEX]
[SYS_INDEX]
[CHN_HEAD]
[CHN_TAIL]
[SEQ_NO]
[START_KEY]
[LATITUDE]
[LONGITUDE]
[RANGE]
[GPS_ENABLE]
[MOT_TYPE]
[EDACS_TYPE]
[P25WAITING]
[RSV]
Get/Set Site Information.
: System Index
: Appended Site Index
: Site Index
: Name
: Quick Key
: Site Hold Time
: Lockout
: Modulation
: Attenuation
: This parameter is always "1"
: Reverse Site Index of the Scan Setting
: Forward Site Index of the Scan Setting
: System Index
: Channel Index Head of the Group List
: Channel Index Tail of the Group List
: Site Sequence Number
: Startup Configuration
: North or South Latitude
: West or East Longitude
: Range
: GPS Location detection
: Band type for MOT/EDACS(STD/ SPL/CUSTOM)
: EDACS
: P25 Waiting time(0,100,200,300, .... , 900,1000)
: Reserve Parameter
240
(max.16char)
(0-99/.(dot) means none)
(0-255)
(0:Unlocked / 1:Lockout)
(AUTO/FM/NFM)
(0:OFF/1:ON)
(1-256)
(0-9/.(dot) means none)
(1-250 : 1= 0.5 mile or km)
(0:OFF/1:ON)
(WIDE/NARROW)
* This is always only ",".