Top Menu; Program System - Uniden BCD996XT User Manual

Top Menu

Press [MENU] key to go to Menu Mode. Top Menu has the following items.

Program System

Program Location
Srch/CloCall Opt
Search for...
Close Call
Priority ID Scan
WX Operation
Tone-Out for ...
Wired Clone
Settings
Turn the [Scroll Control] to select items and press [E / yes / gps] to go to the selected item.
Press [Menu] to exit from Menu Mode.
Program System
You can select a System for editing or create a new System.
Names of existing Systems are displayed as Menu Items. These systems are sorted by the order in which
they were created. "New System" is displayed as the last menu item.
Note: When no systems have been programmed, only "New System" appears.
The limit of Systems is 500. So, if you try to select "New System" when there are already 500 Systems, the
scanner displays "Over Limit" and sounds an Error Tone. Then it returns to Top Menu.
Select the System Name and press [E / yes / gps] to go to the Systems Settings Menu. (See: System
Settings)
If you select a protected system, "Protected System Access Not Allowed Press Any Key" is displayed and
an Error Tone sounds.
Select "New System" and press [E / yes / gps] to create a new System.
Thursday, May 14, 2009
Over Li mi t
Press Any Key
32