Uniden BCD996XT User Manual page 850

EditChannel < UnidenMan4 < TWiki
Set CTCSS/DCS
(Conventional systems only) Choose one of the following CTCSS/DCS options for this
channel:
Off
Search
CTCSS
DCS
Set
Lockout
Digital channel options
The following options are available only when the Audio Type is set to Digital .
P25 NAC Option
Choose whether the scanner limits reception to transmissions that include a specific
Network Access Code (NAC) for this system or frequency.
Search: The scanner opens squelch for any digital signal, but displays the NAC
being used.
Set P25 NAC: The scanner opens squelch only for signals that include the NAC
you enter here. Enter a hexadecimal number between 0 and FFF.
This page applies to the following scanner(s):
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/EditChannel.html (5 of 5)5/26/2009 11:14:45 AM
The scanner ignores all CTCSS and DCS tones and opens squelch on any
signal.
The scanner displays any received CTCSS and DCS tones, but it opens
squelch on any signal.
The scanner prompts you to enter a CTCSS code; it will only open
squelch if the received signal contains a CTCSS tone that matches the one
you enter here.
The scanner prompts you to enter a DCS code; it will only open squelch if
the received signal contains a DCS tone that matches the one you enter
here.
The scanner prompts you to enter a CTCSS or DCS code that you want to
lockout for this channel. The scanner will not open squelch if the received
signal contains a matching CTCSS or DCS tone.
BCD996XT BCD396XT Users