Uniden BCD996XT User Manual page 477

<COMMAND STS>
Get Current Status
Controller → Radio
STS[\r]
Radio → Controller
STS,[DSP_FORM],[L1_CHAR],[L1_MODE],[L2_CHAR],[L2_MODE],[L3_CHAR],[L3_MODE],
[L4_CHAR],[L4_MODE],････,[L8_CHAR],[L8_MODE],[SQL],[MUT],[BAT],[WAT],[RSV],
[RSV],[SIG_LVL],[BK_COLOR],[BK_DIMMER][\r]
[DSP_FORM]
[L1_CHAR]
[L1_MODE]
[L2_CHAR]
[L2_MODE]
[L3_CHAR]
[L3_MODE]
[L4_CHAR]
[L4_MODE]
[L8_CHAR]
[L8_MODE]
[SQL]
[MUT]
[RSV]
[BAT]
[WAT]
[SIG_LVL]
[BK_COLOR]
(OFF,BLUE,RED,MAGENTA,GREEN,CYAN,YELLOW,WHITE)
[BK_DIMMER]
NOTE : ) Display Mode for Line1 – Line8
The number of [Lx_CHAR] and [Lx_MODE] depend on Display Form.
Ex.1)
: Display Form
(each # is 0 or 1) 0 means Small Font / 1 means Large Font.
: Line1 Characters 16char (fixed length)
: Line1 Display Mode 16char
: Line2 Characters 16char (fixed length)
: Line2 Display Mode 16char
: Line3 Characters 16char (fixed length)
: Line3 Display Mode 16char
: Line4 Characters 16char (fixed length)
: Line4 Display Mode 16char
:
: Line8 Characters 16char (fixed length)
: Line8 Display Mode 16char
: Squelch Status
: Mute Status
: Reserve Parameter
: Battery Low Status
: Weather Alert Status
SAME CODE)
: Signal Level
: Backlight Color
: Backlight Dimmer
(space) : NORMAL CHAR, *: REVERSE CHAR
_ (Under bar) : Underline
If all 16chars are normal, only "," is sent.
┌---------------┐
│ -- M E N U --
│Program System
│Program Location|
│Srch/CloCall Opt|
└---------------┘
→ STS[\r]
← 1111,
-- M E N U --
________________,
Program System
****************,
Program Location,
(4 - 8dight:########)
(0:CLOSE / 1:OPEN)
(0:OFF / 1:ON)
* This is always only "0".
(0:No Alert / 1:Alert)
(0:No Alert / 1: Alert / $$$: Alert
( 0 – 5 )
(0:OFF / 1:Low / 2:Middle / 3:High )
| Squelch Status
| Mute Status
Battery Low Status
Weather Alert Status : No Alert
← [L1_CHAR]
,
← [L1_MODE]
← [L2_CHAR]
,
← [L2_MODE]
← [L3_CHAR]
228
: OPEN
: OFF
: No Alert