Key Operation During Scan Hold Mode - Uniden BCD996XT User Manual

Hide thumbs Also See for BCD996XT:
Table of Contents

Advertisement

Key Operation During Scan Hold Mode

Normal Mode
[Scroll Control] knob
Turn this knob to select the channel.
[Scan / srch] key
Press this key to resume scanning.
[Hold /
] key
Press this key to resume scanning.
Long press this key to activate System Hold Mode and resume scanning.
[L/O] key
Press this key once to temporarily lock out the held frequency or TGID. When the scanner is turned off,
this is unlocked.
Press this key twice in a second to lock out the held frequency or TGID. When the scanner is turned off,
this remains locked.
Long press this key to unlock all channels in the current system (for conventional systems).
Long press this key to unlock all frequencies of the site and all TGIDs of the current system (for trunked
system / sites).
[1 – 9, 0] key
Press this key to enter numbers and go to Direct Entry.
[. / no / pri] key
Press this key to input decimal point, hyphen or "i" for Direct Entry.
[E / yes / gps] key
Press this key to edit the data for the current channel.
Press this key to edit the system when the scanner is held on a trunked frequency.
If the current system is protected system, the scanner displays "Protected System Access Not Allowed
Press Any Key" and sound an error tone.
[MENU] key
Press this key to go to the Menu Mode at Top Menu.
Press this key to use Direct Access in Direct entry mode.
Thursday, May 14, 2009
139

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bct15xBc346xtBcd396xt

Table of Contents