Uniden BCD996XT User Manual page 783

[PAGE4]
[PAGE5]
[PAGE6]
[PAGE7]
[PAGE8]
[PAGE9]
This command is only acceptable in Programming Mode.
It cannot turn on/off the Quick Key that has no System / Site.
<COMMAND QGL>
Get/Set Group Quick Lockout
Controller → Radio
QGL,[SYS_INDEX][\r]
QGL,[SYS_INDEX],##########[\r]
Radio → Controller
QGL,##########[\r]
QGL,OK[\r]
########## (each # is 0 - 2)
The Order of Quick Key is as same as LCD Icon (1 – 9, 0).
This command is only acceptable in Programming Mode.
It cannot turn on/off the Quick Key that has no Group.
<COMMAND CSY>
Create System
Controller → Radio
CSY,[SYS_TYPE],[PROTECT][\r]
Radio → Controller
CSY,[SYS_INDEX][\r]
[SYS_TYPE]
CNV
MOT
EDC
EDS
LTR
[SYS_INDEX]
[PROTECT]
Creates a system and return created system index.
The index is a handle to get/set system information.
Returns -1 if the scanner failed to create because of no resource.
This command is only acceptable in Programming Mode.
: Quick Key41 - 49,40
: Quick Key51 - 59,50
: Quick Key61 - 69,60
: Quick Key71 - 79,70
: Quick Key81 - 89,80
: Quick Key91 - 99,90
: Group Quick Key status of [SYS_INDEX].
0 : Not assigned (Displayed as "-" on the scanner.)
1 : On (Displayed as each number on the scanner.)
2 : Off (Displayed as "*" on the scanner.)
: System Type
: CONVENTIONAL
: MOTOROLA TYPE
: EDACS Narrow / Wide
: EDACS SCAT
: LTR
: The Index of Created System
: Protect bit Status (0:OFF / 1:ON)
225