Uniden BCD996XT User Manual page 234

BCT15XBandScopeMode < UnidenMan4 < TWiki
Key Name
(2nd
operation)
<nop>BearTracker /
Action on:
Tap
FUNCTION
+ Tap
Key Name
(2nd
operation)
Action on:
Tap
FUNCTION
+ Tap
FUNCTION
+ Press &
hold
Key Name
(2nd
operation)
Action on:
Tap
FUNCTION
+ Tap
file:///C|/Documents%20and%20Settings/POpitz/My%20...emp/CDImage_090515/Manual/BCT15XBandScopeMode.html (3 of 5)5/26/2009 11:13:04 AM
Highway Patrol /
Alert
Go to Scan Mode.
Go into Alert Plus Toggle the IF for that the
mode and start
scanning.
GPS / Weather
Switch to the GPS
Navigation display.
Toggle the Weather Toggle the attenuator
Alert Priority mode.
Start Weather Scan. Toggle the attenuator
Menu
Enter the Menu Press to enter the Band
Mode. Scope Setting mode and
selected setting flashes.
In Band Scope Setting
mode, selects the next
Enter the Menu
Mode.
4 (IF exchange)
current frequency.
7 (Attenuation)
state.
state for all signals.
. / No (Decimal)
select a setting. The
setting.
NA
5 (Level offset) 6 (Display mode)
NA
NA
8 (Reverse freq.) 9 (Modulation)
NA
NA
NA
0
NA
frequency as the
center frequency.
In Band Scope Setting
mode, with CF
selected edit the
center frequency.
NA
NA
Change the
modulation.
NA
Yes (Enter)
Set the marker
NA