Uniden BCD996XT User Manual page 488

<COMMAND TRN>
Get/Set Trunk Info
Controller → Radio
TRN,[INDEX][\r]
TRN,[INDEX],[ID_SEARCH],[S_BIT],[END_CODE],[AFS],[RSV],[RSV],[EMG],[EMGL],
[FMAP],[CTM_FMAP],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV]
,
[MOT_ID],[EMG_COLOR],[EMG_PATTERN],[P25NAC],[PRI_ID_SCAN][\r]
Radio → Controller
TRN,[ID_SEARCH],[S_BIT],[END_CODE],[AFS],[RSV],[RSV],[EMG],[EMGL],[FMAP],
[CTM_FMAP],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],
[TGID_GRP_HEAD],[TGID_GRP_TAIL],[ID_LOUT_GRP_HEAD],[ID_LOUT_GRP_TAIL],
[MOT_ID],[EMG_COLOR],[EMG_PATTERN],[P25NAC],[PRI_ID_SCAN][\r]
TRN,OK[\r]
[INDEX]
[ID_SEARCH] : ID Search/Scan
[S_BIT]
[END_CODE]
[AFS]
[EMG]
[EMGL]
[FMAP]
[CTM_FMAP]
[TGID_GRP_HEAD]
[TGID_GRP_TAIL]
[ID_LOUT_GRP_HEAD]: L/O TGID Group Index Head of the System
[ID_LOUT_GRP_TAIL]: L/O TGID Group Index Tail of the System
[MOT_ID]
[EMG_COLOR]
[EMG_PATTERN]
[P25NAC]
[PRI_ID_SCAN]
[RSV]
Get/Sets Trunked System Information.
The scanner returns only "," to punctuate for parameters which are not
appropriate the system type.
In set command, the scanner neglects the parameters that are not appropriate
the system.
In set command, only "," parameters are not changed.
The set command is aborted if any format error is detected.
When the system protect bit is ON, except [TGID_GRP_HEAD], [TGID_GRP_TAIL],
[ID_LOUT_GRP_HEAD], [ID_LOUT_GRP_TAIL], other parameters will be send as a
reserve parameter in the Radio -> Controller command.
This command is only acceptable in Programming Mode.
: System Index
: Motorola Status Bit
: Motorola End Code(0:Ignore,1:Analog,2:Analog and Digital)
: EDACS ID Format
: Emergency Alert
: Emergency Alert Level (0:OFF / 1 - 15)
: Fleet Map
: Custom Fleet Map Setting (######## : # is 0-E)
# means Size Code of each BLOCK (from 0 to 7)
0 : Size Code 0
1 : Size Code 1
2 : Size Code 2
3 : Size Code 3
4 : Size Code 4
: TGID Index Head of the System
: TGID Index Tail of the System
: Motorola/P25 ID Format
: Emergency Alert Light color
(OFF,BLUE,RED,MAGENTA,GREEN,CYAN,YELLOW,WHITE)
: Emergency Alert Light Pattern(0:ON/1:SLow /2:Fast)
: P25 NAC Status
: Priority ID Scan
: Reserve Parameter
(0:ID Scan mode / 1: Search Mode)
(0:Ignore, 1:Yes)
(0:Decimal / 1:AFS)
(0:Ignore / 1-9:Alert)
(0-16, 0-15:Preset, 16:Custom)
5 : Size Code 5
6 : Size Code 6
7 : Size Code 7
8 : Size Code 8
9 : Size Code 9
(0-FFF:0-FFF/SRCH:Nac Search)
( 0:OFF / 1: ON)
* This is always only ",".
239
A : Size Code 10
B : Size Code 11
C : Size Code 12
D : Size Code 13
E : Size Code 14
(0:Decimal / 1:HEX )