SettingUpTheHardware < UnidenMan4 < TWiki
Place the clip over the post.
To remove the belt clip
Rotate the scanner so the scanner is bottom-side up. Then slide the scanner straight up until it comes free from the belt clip.
Rotate the scanner 180 degrees.
This page applies to the following scanner(s):
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20D...emp/CDImage_090515/Manual/SettingUpTheHardware.html (3 of 3)5/26/2009 11:13:50 AM
Slide the scanner up and off the belt clip.
BCD396XT BC346XT Users
Slide the clip up into place.