EditSite < UnidenMan4 < TWiki
Input Spacing
When you're finished, the scanner renames the band plan in the following pattern:
{band plan number} :{base frequency} / {spacing}
So a band plan label of 6:534.02585/127.750 means this is band plan number 6, with a
base frequency of 534.02585 MHz and 127.750 kHz between each channel.
Options available for EDACS systems
Set Site Type
Select Wide (standard) or Narrow according to the EDACS site type.
Volume Offset (EDACS SCAT Only)
The scanner can automatically adjust the volume when it tunes to this channel or
frequency. Enter one of the following options:
Softer
-3, -2, -
1
This page applies to the following scanner(s):
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/EditSite.html (5 of 5)5/26/2009 11:14:48 AM
Enter the number of kHz between each channel. Valid
spacings range between 125 kHz and 128 kHz at each 125
Hz step (125.000 kHz, 125.125 kHz, 125.250 kHz, etc.)
No
Louder
Change
0 (default)
+1, +2,
+3
BCD996XT BCT15X BCD396XT