Uniden BCD996XT User Manual page 622

Set Type
This option can be used to select the location type.
POI
Dangerous Xing
Dangerous Road
Turn [Scroll Control] to select the type and press [E / yes / gps] to accept it.
Then the scanner returns to the previous menu.
Set Alert
Set Alert Tone
You can select whether the scanner should sound an Alert Tone when approaching the set Location.
Off
Alert 1 - 4
If you select "Off", the scanner returns to the previous menu.
If you select "Alert1 - 4", the scanner goes to the Alert Level selection.
Auto
Level1 - 15
Set Alert Light
You can select whether the scanner should have an Alert Light when you approach the set Location.
Alert Light Pattern selections.
Off
On
Slow Blink
Fast Blink
Press [E / yes / gps] to accept the entry and return to the previous menu.
Note: This setting menu appears only in "POI".
Set Alert Volume
This option can be used to set the alert level.
Auto
Level1-15
Off
Press [E / yes / gps] to accept the data and return to the previous menu.
Note: This setting menu appears in "Dangerous Xing" and "Dangerous Road".
Thursday, May 14, 2009
No alert sounds.
The scanner sounds Alert1 - 4 when you approach the Location.
The alert is set to the same volume as normal audio.
The alert is fixed to the selected audio level.
The alert light will not turn on
The alert light is set to on
The alert light blinks slowly
The alert light blinks fast
The alert is set to the same volume as normal audio.
The alert is fixed to the selected audio level.
No alert sounds.
64