Dot Matrix; Lcd Flashing Time - Uniden BCD996XT User Manual

LNK:
DAT:
ENC:
C67. 0 / DCS023 /
NAC:000 / etc.:
SCR:
WX:
F
(Function icon) :
P
(Priority Channel) :
(Signal Indicator) :
(KEYPAD LOCK):
(BATTERY Low Alert): This icon blinks when the battery voltage is low. This icon blinks when a bad
(Close Call Pri ) :
(Close Call DND) :

Dot Matrix

The display element consists of a 128 x 64 pixel display. See Font Data for character patterns.
Since the display is entirely dot matrix, a great variety of different things can be shown. The above shows
the most common display elements in most modes. Additional examples are shown throughout this
reference guide.

LCD Flashing Time

About 500 mS on/500 mS off (1 Hz).
Thursday, May 14, 2009
This icon appears when data is received on a VOICE CHANNEL. This shows in the
same place as "P25".
This icon appears when data on CONTROL CHANNEL is received. This shows in
the same place as "P25" icon.
This icon appears when encrypted APCO P25 digitized voice is received. The
scanner mutes audio. This shows in the same place as "P25".
The scanner displays the CTCSS/DCS/P25 NAC here. This shows in the same
place as "P25".
This icon appears when one or more Broadcast Screen Band is set to on.
This icon turns on while the Weather Alert Priority Scan works.
This icon appears in Function Mode. Function Mode does not have a timeout
when this icon blinks.
This icon appears when the channel set to "Priority On".
This icon shows strength of the signal from 0 to 5.
This icon will appear only when the KEYLOCK function is On.
battery is installed and an AC adapter is connected. This icon appears during
battery check.
This icon appears in Close Call Priority Mode. This blinks in Close Call Only Mode
or when the scanner gets a Close Call hit.
This icon appears in Close Call DND Mode is CC DND Mode. This is a reverse
display of Close Call Pri icon.
22