Multi-Site System; Control Channel Only; P25 One-Frequency Trunking; Priority Id Scanning - Uniden BCD996XT User Manual

Hide thumbs Also See for BCD996XT:

Table of Contents

Multi-Site System

All trunked systems can have more than one site. All sites in the system share the same Channel Groups

and Channels.

Trunk Tracking can be achieved by entering only the control channels for Motorola and P25 systems.

The scanner can follow individual talk groups on P25 single-frequency systems that use both NAC and

TGID's for squelch control and user identification. ID Search and ID Store are available, just like on trunked

Trunked channels can be assigned priority. When the scanner is monitoring the control channel, channels

you tag as priority are given a higher priority over non-priority channels when they become active.

For Motorola systems that have channel priority active on the system, if you flag a channel as priority and

the system also has that TGID identified as a priority channel, the scanner will preempt any current

transmission if the TGID becomes active.

The scanner shows all trunked activity when you hold on the control channel.

You can program up to 10 custom search ranges and either search them exclusively or include these

searches when scanning.

If you hold on a conventional channel, you can start searching from the current frequency. If you hold on a

trunked channel, you can quickly switch to ID Search mode.

The scanner can automatically store frequencies found during a search.

100 Steps/Second in search mode (max, except for 5 kHz steps)

300 Steps/Second in search mode (max, 5 kHz steps)

Turbo mode automatically applies to 5 kHz step searches.

Thursday, May 14, 2009

Show Quick Links

Table of Contents

Bct15x Bc346xt Bcd396xt