Memory Initialization - Uniden BCD996XT User Manual

MEMORY INITIALIZATION

Press and hold [2 / sr 2], [9 / mod] and [Hold /
be able to restore the Preprogram list.
The scanner clears all data and returns to initial setting. The display is as follows.
*If you unplug the AC Adapter or turn off the scanner during initialization, the scanner starts initializing
again at next power on.
After clearing data, the scanner displays "Restore Preprogram List? Yes = "E" / No = "." " then you can
select whether to restore the Preprogram List.
Press [E / yes / gps] to restore the Preprogram List. Or, pressing / no / pri] to use without restoring the
Preprogram List.
Then other keys are invalid and do not ring Key Beep.
If you press [E / yes / gps], the display is as follows.
] and turn on the scanner to initialize the Memory and
All Memory Clear
Please Wai t
Restore
Preprogram Li st?
Yes="E" / No=". "
Loadi ng
Preprogram Li st
Please Wai t
201