ToneOutFor < UnidenMan4 < TWiki
Tone-Out for...
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
Tone-Out Standby
Tone-Out Setup
Tone-Out Search
Tone-Out Standby
Check the tone out channels for paging tones, according to each channel's individual
settings.
Tone-Out Setup
This menu lets you configure the 10 tone-out channels. Select the channel you want to
edit from the list, then set the frequency, tone, and other options for that channel.
Edit Name
Enter a name or edit the existing one. Names can be 16 characters long, and they can
contain upper and lower case letters, punctuation, and spaces. Turn the SELECT-
VOLUME-SQUELCH knob on the handheld scanners or the SCROLL / FUNCTION
knob on mobile scanners to choose the character you want, then press 6 (right cursor) to
move the cursor to the next character.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/ToneOutFor.html (1 of 3)5/26/2009 11:16:05 AM
Edit Name
Set Frequencies
Set Tone
Set Delay Time
Set Alert
Set Alert Tone
Set Alert Light
Set Audio AGC (BCD396XT and BCD996XT Only)
Set Record (BCD996XT and BCT15X Only)