Set Speed Limit - Uniden BCD996XT User Manual

ProgramLocation < UnidenMan4 < TWiki
Dangerous Xing alert tone:
1175 Hz for 250 ms / Silence for 50 ms / 1319 Hz for 50 ms / Silence for
50 ms / 1397 Hz for 250 ms
Dangerous Road alert tone
1568 Hz for 250 ms / Silence for 50 ms / 1760 Hz for 50 ms / Silence for
50 ms / 1976 Hz for 250 ms / Silence for 50 ms / 2093 Hz for 50 ms /
Silence for 50 ms / 1047 Hz for 250 ms
Set Alert Light
This setting is exactly the same as its counterpart on the system, site, and channel menus.
Click on the setting for a complete explanation.
Set Location Info
Enter the latitude and longitude for this location.
Set Heading
Decide whether the scanner alerts you of this Dangerous Xing or Road each time you
approach it or only when you are traveling in a particular direction. To make the alert
direction-dependent, select the direction from the list; select All Range to be alerted
regardless or your direction.

Set Speed Limit

Decide whether the scanner alerts you of this Dangerous Xing or Road each time you
approach it or only when you are traveling above a certain speed. To make the alert
speed-dependent, enter the speed limit for this location; leave the speed limit blank to be
alerted regardless of your speed. The scanner treats the number you enter here as miles
or kilometers depending on the value you selected in the Set Unit field in the Set GPS
Format menu (under the main Settings menu). Enter a range from 0 through 200 mi/km,
in 1 mi/km steps.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ents/temp/CDImage_090515/Manual/ProgramLocation.html (5 of 6)5/26/2009 11:15:53 AM