Uniden BCD996XT User Manual page 41

MotorolaTrunkedSystems < UnidenMan4 < TWiki
1. On the
2. Go to the
3. Enter at least 1 frequency for this site.
4. If you need to change any of the frequency properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
None
Recommended
None
Lockout
Available operations
Delete a
frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can scan the system in ID Search mode. In this
mode, the scanner stops on all system traffic for talk groups you have not locked out. If you want to use
ID Scan mode, you'll need to program channels into the system. In ID Scan, the scanner only stops on
talk groups you have programmed into a channel.
Create a channel group
Each Motorola system can contain up to 20 channel groups.
1. On the
2. Go to the
3. If you need to change any of the channel group properties, you can do that now. Unless a
file:///C|/Documents%20and%20Settings/POpitz/My%20D...p/CDImage_090515/Manual/MotorolaTrunkedSystems.html (6 of 8)5/26/2009 11:11:53 AM
Edit Site menu, select the site you just created.
Set Frequencies sub-menu and select New Frequency .
Option name
Required
Optional
Set Lockout
Delete
Frequency
Program System menu, select the system you just created.
Edit Group menu and select New Group .
Set Frequencies sub-menu. If