Key Operation In Close Call Only Mode - Uniden BCD996XT User Manual

CloseCallMode < UnidenMan4 < TWiki
Close Call mode
This page applies only to the
see:
When the scanner is in Close Call mode, it performs a close call check every 2 seconds.
The scanner switches to the selected bands and searches for unusually strong signals
(indicating the transmitter is probably somewhere close by). After the close call check, the
scanner returns to its previous function.
In Close Call Do Not Disturb mode, the scanner does not perform a Close Call check if it
is already receiving an audio transmission. This prevents the audio from cutting out every 2
seconds.
In Close Call Only mode, the scanner only performs Close Call checks.
The Close Call
can change the overall Close Call options through the

Key operation in Close Call Only mode

Turn the SELECT-VOLUME-SCROLL knob to resume searching.
FUNCTION + tap MENU to go to the Close Call menu.
Key Name
(2nd
operation)
Action on:
file:///C|/Documents%20and%20Settings/POpitz/My%20D...ments/temp/CDImage_090515/Manual/CloseCallMode.html (1 of 4)5/26/2009 11:13:56 AM
BCT15X Close Call Mode
BCD996XT Close Call Mode
menu lets you change the operation settings of the Close Call feature. You
Hold (Close
Call)
BCD396XT and BC346XT. For other models
Srch/CloCall Opt
2 (Search 2)
1 (Search 1)
menu.
3 (Search 3)