Uniden BCD996XT User Manual page 123

CategoryUsersGuide < UnidenMan4 < TWiki
Setting up the hardware What's included Inside the box you should find: OR nop
BCD396XT or nop BC346XT handheld trunking scanner ...
Settings
PaulOpitz
r6 - 12 May 2009 - 18:21
Settings This page applies only to the BCD396XT and BC346XT. For other models see:
BCD996XT Settings BCT15X Settings Set Backlight This menu lets you configure ...
SingleFrequencyP25TrunkedSystems
PaulOpitz
r8 - 13 May 2009 - 14:50
Single Frequency P25 Trunked Systems Single frequency P25 systems are almost
idfentical to standard P25 systems, except they only have one site per system and the ...
SrchCloCallOpt
PaulOpitz
r9 - 13 May 2009 - 14:51
Srch/CloCall Opt This menu lets you set general options for how the scanner operates in
Search and Close Call modes. Freq Lockouts Rvw Search L/O : This option ...
StandardP25TrunkedSystems
PaulOpitz
r10 - 13 May 2009 - 14:51
Standard P25 Trunked Systems This section deals with standard Project 25 or P25
systems. Click here for information on P25 one frequency systems. Below is an
example ...
StartupKeys
PaulOpitz
r4 - 24 Mar 2009 - 21:50
Startup Keys Startup Keys let you change the lockout state for several systems, sites, and
search ranges all at the same time. When you activate the Startup Key, the ...
StatebyStateScanning
PaulOpitz
r2 - 08 May 2009 - 18:39
State by State Scanning The BCT15X comes preprogrammed with many of the channels
used by local police, department of transportation, and highwaypatrol agencies,
file:///C|/Documents%20and%20Settings/POpitz/My%20...temp/CDImage_090515/Manual/CategoryUsersGuide.html (16 of 18)5/26/2009 11:12:18 AM