Display with Location Alert
ALERT for
Road 0. 500mi
R183 at Beltli ne
SCAN
This shows the direction of Location Alert.
While displaying the
F
Point Of Interest
The alerts you by ringing an alert if you approach the selected destination. The timing to which the alert
rings is set up in Set LocationInfo. Or, the alert is set up in Set Alert.
The screen displays "ALERT for" on the first line. And the second line displays "POI" as Location Alert
System Type and the distance to the destination.
Dangerous Xing / Road
The scanner may ring an Alert three times at different timings.
The screen displays "ALERT for" on the first line. And the second line displays the Location Alert System
Type and the distance to the Alert Location. An arrow which shows the direction of Alert Location is
displayed too. Alert Light is turned on.(See: Set Alert Light.)
R183 at Beltli ne
SCAN
There are three ranges for Alert, 1.0mile, 0.50 mile and 0.10 mile if you select "mile" as the unit. If you
select "km" as the unit, the alert distances are 1.0km, 0.50 km and 0.10 km. (See: Set Unit)
Thursday, May 14, 2009
↑
icon, Location Alert arrow changes to a small font.
ALERT for
POI
HOME
SCAN
ALERT for
Xi ng 0. 500mi
↑
Dangerous Xing
This shows Location Alert System Type.
This shows that the scanner is in Location Alert.
This shows the distance to Location Alert.
This shows Location Alert name.
0. 500mi
↑
Route 84
182
ALERT for
Road 0. 340mi
↑
SCAN
Dangerous Road