Uniden BCD996XT User Manual page 643

Set Alert Light
You can set whether the scanner should have an alert light when it gets a Close Call hit.
Alert Light Pattern selections.
Off
On
Slow Blink
Fast Blink
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set CC Pause
This option can set time from the reception of a Close Call hit to when it returns to previous mode.
Turn [Scroll Control] to set from the following item.
3 sec
5 sec
10 sec
15 sec
30 sec
45 sec
60 sec
Infinite
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set CC Bands
This setting controls the band filtering used during Close Call operation.
You can turn on or off the following bands.
VHF Low 1
VHF Low 2
Air Band
VHF High
UHF
800MHz+
Turn [Scroll Control] to move the cursor, and press [E / yes / gps] to change the setting.
On The scanner check Close Call in this Band.
Off The scanner does not check this Band.
Press [Menu] to return to the previous menu.
Thursday, May 14, 2009
The alert light will not turn on
The alert light is set to on
The alert light blinks slowly
The alert light blinks fast
: On/Off
: On/Off
: On/Off
: On/Off
: On/Off
: On/Off
: 25.0000
: 54.0000
: 108.0000
: 137.0000
: 400.0000
: 806.0000
849.0125
894.0125
1240.0000
85
- 53.9800 MHz
- 107.9000 MHz
- 136.9916 MHz
- 224.9800 MHz
- 512.0000 MHz
- 823.9875 MHz
- 868.9875 MHz
- 960.0000 MHz
- 1300.0000 MHz