Inter-Function Delay; Special Keyboard Feature - CipherLab Cobia User Manual

2.1.4 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
1) Read the barcode above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.

2.1.5 SPECIAL KEYBOARD FEATURE

By default, the special keyboard feature is based on the factory definition. You can decide
whether to apply the special keyboard feature. Refer to
Value" barcode on page 183 for the desired inter-function delay
Chapter 2 Selecting Output Interface
Inter-Function
Delay... (*0~254)
Keyboard Wedge
*Apply
Bypass
Update
Table.
45