Output Interface; Keyboard Wedge Interface; Keyboard Type; Keyboard Style - Alphabets - CipherLab 1000 CCD User Manual

3. Output Interface

The 1000 is a
single
scanner, an RS-232 scanner, or a USB scanner. The output interface must be
specified at time of order.

3.1 Keyboard Wedge Interface

3.1.1 Keyboard Type

The keyboard wedge interface is enabled by configuring/selecting keyboard type.
The supported keyboard types are listed below.
 PCAT - US, French German, Italian, Swedish, Norwegian, UK, Belgium,
Spanish, and Portuguese KBD
 PS2-30
 IBM 3477 TYPE (Japanese KBD)
 IBM 34XX,319X & Memorex Telex (122Keys)

3.1.2 Keyboard Style - Alphabets

Keyboard layout style can be selected. There are three options to this setting :
default layout (US or English style), AZERTY layout, and QWERTZ layout. This
setting only works when the keyboard type selected is for US keyboard. The
scanner will make necessary adjustment when sending the 'A', 'Q', 'W', 'Z', 'Y',
and 'M' character according to this setting.
3.1.3 Keyboard Style – Digits
There are two digit layout styles as shown on the following figures. One has its digit
keys on top (upper row), the other has them on bottom (lower row).
The digit layout style can be changed by configuring this setting. There are three
options to this setting : Default, Lower Row, and Upper Row. The scanner will
make necessary adjustment when sending digits according to the setting value of
this parameter. This setting is meant to be used with the above setting (Keyboard
Style – Alphabets) and perhaps Character Substitution setting, when support to
languages not available on the scanner is needed.
! @
1 2
Digits on Lower Row
1 2
! @
Digits on Upper Row
interface CCD scanner. It can be ordered as a keyboard wedge
# $
3 4
3 4
# $
5