Entering Pin Code For Authentication; Use Preset Pin - CipherLab 1660 User Manual

1660 Barcode Scanner

ENTERING PIN CODE FOR AUTHENTICATION

USE PRESET PIN

1) In the configuration mode, read the label below to use a preset PIN for
authentication.
Use preset PIN
2) Read one of the labels to specify the PIN code, in decimal or hexadecimal.
By default, the PIN code is set to "0000". Maximum 16 characters are allowed.
Enter PIN Code
in Hexadecimal ...
3) Read the "Decimal
172 for the desired digits or character string.
Read the "Clear PIN Code" label first if you need to re-input the PIN code.
Clear PIN Code
4) Read the "Validate" label to complete this setting.
174
User Guide
Value" label on page 171 or the
Enter PIN Code
in Decimal ...
"Hexadecimal Value" label on page
Enter Setup